Sea-doo GTX Limited iS 255 2009, Shop Manual

Page: 360 / 555

Section 05 ELECTRICAL SYSTEM
Subsection 07 (GAUGE)
A single segment of a bar gauge type indicator is
turned on to indicate the relative position of the
watercraft bow.
smo2009-002-114_l
VTS POSITION INDICATION
Refer to
IBR AND VTS
subsection for more de-
tails.
7) iS Position
The iS position display (intelligent Suspension)
provides a visual indication of the relative height
of the suspension.
It also indicates if the suspension is in AUTO
mode of operation.
1
2
smo2009-002-114_m
1. iS position indicator
2. iS AUTO mode indicator
When the suspension system is operating in
AUTO mode, the AUTO indicator and all bar seg-
ments of the position indicator will be on.
When the suspension height is adjusted manually
using the iS , the system switches to MANUAL
mode of operation. The AUTO indication disap-
pears and a single segment of the bar gauge is
turned on to indicate the position of the suspen-
sion.
Refer to
SUSPENSION (iS)
for more details.
8) Numerical Display
A numerical display is used to provide a variety of
indications as selected by the operator:
– Engine RPM
– Watercraft speed
– Lake temperature
– Water depth (GTX LTD iS).
1
2
smo2009-002-114_n
EXAMPLE - NUMERICAL DISPLAY
1. Water depth indication (GTX LTD iS)
2. Numerical display
When the information center is first powered up,
the numerical display defaults to the last selected
indication.
The numerical display is also used to display vari-
ous system mode settings such as:
– VTS PRESET
– LEARNING KEY setting
– RENTAL KEY setting
– SLOW SPEED MODE setting.
Changing Numerical Display Indication
To change the indication in the numerical display,
press the MODE button on the RH handlebar re-
peatedly until DISPLAY is visible in the multifunc-
tion display.
smr2009-036
337