Sea-doo GTX Limited iS 255 2009, Shop Manual

Page: 71 / 555

Section 02 ENGINE
Subsection 04 (SUPERCHARGER)
4
3
1
F00B2FA
2
1. Supercharger shaft
2. Ball bearing
3. Bearing support plate
4. Protrusion of support plate on this side (underneath inner race)
3. Apply enough engine oil on NEW ball bearing.
4. Press in the ball bearing in supercharger hous-
ing half (engine side), by using
BEARING SUP-
PORT/PUSHER (P/N 529 035 950)
.
529035950
1
F00B2EA
1. Bearing support/pusher
5. Mount supercharger housing half (engine side)
on the
SUPPORT PLATE (P/N 529 035 947)
.
529035947
6. Apply
LOCTITE 243 (BLUE) (P/N 293 800 060)
on
retaining disc. If a new retaining disc is used,
the threads are coated with a self-locking prod-
uct.
7. Install the retaining disc in supercharger hous-
ing half by using the
4-PIN SOCKET (P/N 529 035
948)
.
8. Torque retaining disc to 29 N•m (21 lbf•ft).
529035948
1
F00B2IA
2
1. Retaining disc
2. 4-pin socket
9. To press supercharger shaft in housing half (en-
gine side), properly support bearing using the
SUPPORT PLATE (P/N 529 035 947)
and the
BEAR-
ING SUPPORT/PUSHER (P/N 529 035 950)
under
supercharger housing half.
48
smr2009-020