Sanken SVCO6, Instruction Manual, Page: 272 / 326

- 270 -
7-4 Serial Communication Function
OP—CD Example of communication data (when inverter number is 1)
Transmission from computer to inverter Transmission from inverter to computer
e
· Batch stop command
· The selected inverters are stopped
simultaneously.
HD IN OP SUM EM
* 3 3 e SUM
CR or
CR+LF
· Send with inverter number 33
· No response is returned.
· The command can be ignored if operation control is not
permitted.
· Batch stop command
· All connected inverters are stopped
simultaneously.
HD IN OP SUM EM
* 3 4 e SUM
CR or
CR+LF
· Send with inverter number 34
？
· Error response
(Response of parity, SUM error and
command code undefined)
HD IN OP DT SUM EM
* 0 1 ? DT SUM
CR or
CR+LF
*DT
：
―p‖
：
Parity error
―s‖ ：
Checksum error
―u‖
：
Command code undefined
―d‖ ：
Data length, format abnormal
Note: The data formats for reading of F5001 (poles, voltage and capacity) and the F5001 data format have a 5-digit
formation.
X Y ZZZ
Number of poles
Examples) 4 poles →―4‖
Rated voltage
Set the rated voltage using the corresponding setting number as follows:
Setting No.
1 2 3 4 5 6 7 8
Rated voltage 200 220 230 380 400 415 440 460
Example) 380V →―4‖
Rated capacity
Set the rated capacity using the corresponding setting number as follows:
Rated capacity 0.37kW 0.4kW 0.55kW 0.75kW 1.1kW 1.5kW 2.2kW
Setting No.
1 2 3 4 5 6 7
Rated capacity 3.0kW 3.7kW 4.0kW 5.5kW 7.5kW 11.0kW 15.0kW
Setting No. 8 9 10 11 12 13 14
Rated capacity 18.5kW 22.0kW 30.0kW 37.0kW 45.0kW 55.0kW 75.0kW
Setting No.
15 16 17 18 19 20 21
Rated capacity 90.0kW 110kW 132kW 160kW 185kW 200kW 220kW
Setting No. 22 23 24 25 26 27 28
Rated capacity
250kW 280kW 315kW 355kW
Setting No.
29 30 31 32
Example
）
When writing 4.0kW →―010‖ or ―_10‖
When reading 4.0kW →―_10‖
Where, ―_‖ is ASCII code 5FH.