Sanken SVCO6, Instruction Manual, Page: 191 / 326

- 189 -
-
189
-
C
h
ap
ter
7
7-3 Description of Functions
Scheduled operation function
Simple scheduled operation function (F2201=1)
F2201 Selection of scheduled operation
F2202 Simple scheduled operation repetitions
The function to select an operation mode.
Code No. Function Name Date Content
Setting
Resolution
Factory
Presets
F2201 Selection of scheduled
operation
0
：
Normal operation
1
：
Simple scheduled operation
2
：
Disturbed operation
1 0
F2202 Simple scheduled operation
repetitions
0
：
Continuous
1
-
250
：
Repetition count
1 1
●
The function to establish a graph with the function codes for auto operation of running direction, set frequency,
operation time, acceleration/ deceleration time and so on. This can be used effectively during setting the operating
graph of auto operation.
●
The operating graph including stopping timer can be set into 16 graphs. Furthermore, the total 16 graphs can be
operated as one cycle, also it can be operate repeatedly within the specified times. Since the operating status will be
stored in the memory during power failure, the inverter will continue the interrupted graph when it is returned to
normal operation.
1) Use control terminals on inverter
Control Terminal Content Function Code Setting
DI1-DI8
*
Timer reset function F1414-F1421 37
DO1-DO3
*
Cycle completion signal F1509-F1511 3
DCM1, DCM2 Digital signal common
terminal
*
Please select the terminals through the function codes and set the contents.
2) Startup of simple scheduled operation

Please set F2201=1 (simple scheduled operation). When motor control mode is V/f or speed control, the simple
scheduled operation is effective.

The operating command is only effective for operation panel, external control circuit terminal and other
forward run, so please input forward run command which has no relationship with the operation direction.

The operation direction and acceleration/deceleration time can be set by the 16 timers from T1 to T16.
3) Setting method

Enter 2-digit value into the forward/reverse run and acceleration/deceleration (F2221-F2235) in T1-T15.