Sanken SVCO6, Instruction Manual, Page: 162 / 326

- 160 -
7-3 Description of Functions
The methods of conversion between output values of possible output analog signal from I+ terminal and actual values are
shown in the table below.
F1520
Set
value
Output signal content Conversion method
0 No function
1 Set frequency [Hz] 120Hz/16mA(120Hz:20mA, 0Hz:4mA)
2 Output frequency [Hz] 120Hz/16mA(120Hz:20mA, 0Hz:4mA)
3 PID1 feedback value [Hz] 120Hz/16mA(120Hz:20mA, 0Hz:4mA)
4 PID2 feedback value [Hz] 120Hz/16mA(120Hz:20mA, 0Hz:4mA)
5 Output current [A]
＊
1
6 Output voltage [V] 500V/16mA(500V:20mA, 0V:4mA)
7 DC voltage [V] 500V/8mA(1000V:20mA, 0V:4mA)
8
Radiator temperature [
℃
] 100
℃
/12.8mA(125
℃
:20mA, 0
℃
:4mA)
9 Load factor [%]
(integral value of the electric thermistor)
100%/8mA(200%:20mA, 0%:4mA)
10 Load factor [%] (ratio to rated current) 100%/8mA(200%:20mA, 0%:4mA)
11 VIF1 analog input value [V]
4-20mA current input
，
16mA/16mA(20mA:20mA, 4mA:4mA)
0-5V voltage input
，
5V/8mA(5V:20mA, 0V:4mA)
0-10V voltage input
，
10V/16mA(10V:20mA, 0V:4mA)
12 VIF2 analog input value [V]
13 VIF3 analog input value [V]
14 Speed [rpm] 1,800rpm/16mA(1,800rpm:20mA, 4mA:4mA)
15 Active power [kW]
＊2
16 Apparent power [kVA]
＊3
17 PID1 command value [Hz] 120Hz/16mA(120Hz:20mA, 0Hz:4mA)
18 PID1 input deviation value [Hz] 120Hz/16mA(120Hz:20mA, 0Hz:4mA)
19 PID2 command value [Hz] 120Hz/16mA(120Hz:20mA, 0Hz:4mA)
20 PID2 input deviation value [Hz] 120Hz/16mA(120Hz:20mA, 0Hz:4mA)
24 External PID1 output value [Hz] 120Hz/16mA(120Hz:20mA, 0Hz:4mA)
25 External PID2 output value [Hz] 120Hz/16mA(120Hz:20mA, 0Hz:4mA)
35 Command frequency [Hz] 120Hz/16mA(120Hz:20mA, 0Hz:4mA)
36 Command torque [%]
400%/16mA(+200%:20mA, 0%:12mA, -200%:4mA) (
※
1)
40 Output torque [%]
400%/16mA(+200%:20mA, 0%:12mA, -200%:4mA) (
※
1)
※
1 The positive and negative values of torque are output with 12mA as the center.