
- 223 -
-
223
-
C
h
ap
ter
7
7-3
Description of Functions
Motor parameters
F5001
Motor poles, voltage and capacity
Set the poles, voltage and capacity of the motor connected to the inverter.
Code No.
Function Name
Date Content
Setting
Resolution
Factory
Presets
F5001
Motor poles, voltage and capacity
XYZZZ
X: Poles
Y: Rated voltage
Z: Motor capacity
※
※
Typical values have been entered for each motor model.
●
The followings are applicable values and displaying contents.
1) Poles: 4 kinds of 2-8 poles.
2
4
6
8
2) Rated voltage: show the setting range of rated voltage by serial number.
Serial No.
1
2
3
4
5
6
7
8
Rated voltage
200
220
230
380
400
415
440
460
3) Motor capacity: the following table shows the setting scope of the motor capacity.
Unit: [kW]
0.37
0.4
0.55
0.75
1.1
1.5
2.2
3.0
3.7
4.0
5.5
7.5
11.0
15.0
18.5
22.0
30.0
37.0
45.0
55.0
75.0
90.0
110
132
160
185
200
220
250
280
315
355
Symbol
means that there is a blank.
Display example) When using a motor of 4 poles, 220V and 2.2kW, the 7-segment monitor will display:
Display example) When change the rated voltage for the motor of 4 poles, 200V and 2.2kW.
Note: In V/f mode (F1001=1), in order to display the speed, only pole data is used.
In the modes of speed control, torque control and position control (F1001=2, 3, 4, 5, 6), determine the standard
values of all control constants according to the setting value of corresponding function codes. Therefore, this
function code must be set correctly when used in the modes of speed control, torque control and position
control. For setting method for special motor used in these modes, please contact with us.
Rated voltage:
three or less for 200V class inverters.
four or more for 400V class inverters.
Motor capacity: The same level or 2 levels smaller than the inverter class.
(Only 8 pole motors, 3 levels lower motor can be chosen.)
When motor is not selectable, it may display
or
.
Summary of Contents for SVCO6
Page 1: ...High Performance Vector Control Inverter Instruction Manual SANKEN ELECTRIC CO LTD ...
Page 2: ......
Page 324: ... 322 Memorandum ...
Page 325: ......