Machine setup
222
12. Menu Overview and Advanced Features
3
General Settings
Some menus may differ from your machine depending on its options or
models.
Before using the machine, set up the general settings, as follows:
Press
Machine Setup
>
General Settings
from the display screen.
Feature
Description
Date and Time
a
Allows you to set the date and time. The date and
time you set in this option will be used for sending/
printing delayed fax/print jobs or will be printed on
reports.
Power Saver
Allows you to reduce energy consumption. If you set
this option, the machine goes into power saving
mode when not in use.
•
Power Save (minutes):
When you are not using
the machine for a while, use this option to save
power. The machine conserves more power in
Power Save
option than in
Low Power Save
mode.
•
Low Power Save (minutes): Low Power Save
option allows your machine to save power. When
you are not using the machine for a while, some
parts of the machine automatically enter
Low
Power Save
option.
Low Power Save
option
conserves less power than
Power Save
option.
•
Performance Optimization:
When this option is
On
, you can wake up the machine from the
power saving mode with the following actions:
-
Pressing
(
Power/Wakeup
)on the control
panel.
-
Loading paper in a tray.
-
Opening or closing the cover.
-
Pulling a tray out or pushing a tray in.
-
Place the originals in the DSDF.
-
Plug in the USB Drive device.
Feature
Description
Summary of Contents for ProCpress M408 Series
