Samsung ProCpress M408 Series, User Manual

Page: 159 / 396

Sending a fax
155
8. Faxing
9
Sending a fax using speed dial numbers
When you are prompted to enter a destination number while sending a fax,
enter the speed dial number you set previously (see "Setting up an Address
Book" on page 169).
1 Place the originals face up in the DSDF or place a single original face
down on the scanner glass and close the DSDF (see "Loading originals"
on page 64).
2 Press Fax from the display screen.
3
Adjust the document settings in the Advanced or Image tab (see
"Adjusting the document settings" on page 163).
4 Press the Basic tab.
5 Select Resolution .
6
When you press the input line from display screen:
• For a one-digit (0-9) speed dial number, press and hold the
corresponding digit button using the numeric keypad on the control
panel.
• For a two- or three-digit speed dial number, press the first digit
button(s) and then hold down the last digit button using the
numeric keypad on the control panel.
7 Press ( Start ) on the control panel.
The machine starts to scan and send a fax to the destination.