Samson 3730-6, Mounting And Operating Instructions

Page: 66 / 124

Enter the pin position and nominal range:
Pin position
Default No
Nominal range
(locked with Code 4 = No)
Turn
®
Code 4
Press , Code 4 blinks
Turn ® Pin position on lever (see relevant
section on attachment)
Press
Turn
® Code 5
Press , Code 5 blinks
Turn ® Nominal travel/angle
Press
Select the initialization mode:
Initialization mode
Default MAX
Turn ® Code 6
Press
Turn
®
SUB
Press to confirm
SUB
as the initialization
mode.
Enter the direction of action:
Direction of action
Default
ää
Turn ® Code 7
Press , Code 7 blinks
Turn ® Direction of action (
ää
/
äæ
)
Press
Deactivate travel limit:
Travel limit
Default
100.0
Turn
®
Code 11
Press , Code 11 blinks
Turn ® No
Press
Change pressure limit and control parame-
ters:
Note: Do not change the pressure limit
(
Code 16
). Only change the control param-
eters K
P
(
Code 17
) and T
V
(
Code 18
) if the
settings of the replaced positioner are
known.
66
EB 8384-6 EN
Start-up – Settings
mm
mm