Samson 3730-6, Mounting And Operating Instructions

Page: 44 / 124

44
EB 8384-6 EN
Attachment to the control valve – Mounting parts and accessories
Table 7 · Attachment of external position sensor Order no.
Direct attachment
Mounting parts for actuators with 120 cm² see Fig. 13 left
1400-7472
Connecting plate (9, old) for Actuator Type 3277-5xxxxxx.
00
G
1
8
1400-6820
1
8
NPT 1400-6821
Connecting plate (new) for Actuator Type 3277-5xxxxxx. 01 (new) 1)
1400-6823
Mounting parts for actuators with 240, 350, 355 and 700 cm², see Fig. 13 right
1400-7471
NAMUR attachmt.
Mounting parts for attachment to NAMUR rib with lever L and XL, see Fig. 14
1400-7468
Micro-flow valve
Mounting parts for Type 3510 Micro-flow Valve, see Fig. 15
1400-7469
Attachment to
rotary actuators
VDI/VDE 3845 (September 2010), refer to section x for details
Actuator surface corresponds to level 1
Size AA1 to AA4 with follower clamp and coupling wheel, version with
CrNiMo steel bracket, see Fig. 16
Size AA1 to AA4, heavy-duty version
Size AA5, heavy-duty version (e.g. Air Torque 10 000) 1400-7473
1400-9384
1400-9992
Bracket surface corresponds to level 2, heavy-duty version 1400-9974
SAMSON Type 3278 with 160 cm² (also for VETEC Type S160 and Type R),
heavy-duty version
1400-9385
SAMSON Type 3278 with 320 cm² and for VETEC Type S320, heavy-duty
version
1400-5891
and
1400-9974
Accessories for
positioner
Connecting plate (6)
G
1
4
1400-7461
1
4
NPT 1400-7462
Pressure gauge bracket (7)
G
1
4
1400-7458
1
4
NPT 1400-7459
Pressure gauge mounting kit up to max. 6 bar
(output/supply)
St. steel/brass 1400-6950
St. steel/st. steel 1400-6951
Bracket to mount the positioner on a wall
Note: The other fastening parts are to be provided at the site of installation as
wall foundations vary from site to site.
0309-0111
1)
Only new switchover and connecting plates can be used with new actuators (Index 01).
Old and new plates are not interchangeable.