EN-175
9 | Menu | 9.11 | GPIO Confi guration: The Global GPIO Settings Menu
EN
SurroundControl 31900/31960 Series
9.11 | GPIO Confi guration: The Global GPIO Settings Menu
on can e. g. be used to control external units or applications.
Each GPIO output (
Output 1
to
Output 8
in the
GPIO
co-
lumn) can have up to three combo boxes, depending on its
confi guration.
This menu tab displays the
Global GPIO Settings
menu page
used to defi ne the functions, timings and logical assignments
of the 8 GPIO outputs. Among others, each GPIO output can
be set to be used for alarm events or to be activated after one
of the sub presets was selected, alternatively. The second opti-
• Function
These combo boxes are used to defi ne whether an
GPIO
output
functions as alarm event output (see
Alarm Con-
fi guration
chapter) or is activated after a Sub Preset has
been switched (see
Monitoring Input Routing
chapter
further ahead).
• Alarm
No other combo box is available. The corresponding
Alarm-Event Type Selection
combo box on the
Global Alarm Setting
menu page is available. The
corresponding
GPIO 1
to
8
check boxes on the
Key
1
to
Key 7
menu pages of the
Monitoring Input
Routing
are greyed out and unavailable.
• Key
Preset
Two other combo boxes are available (see below).
The corresponding
Alarm-Event Type Selection
combo box on the
Global Alarm Setting
menu page
is greyed out and unavailable. The
GPIO 1
to
8
check
boxes on the
Key 1
to
Key 7
menu pages of the
Monitoring Input Routing
are available.
•
Output Signal Timing
(Only available in case the
Key Preset
option is selected
in the
Function
combo box)
The combo boxes in this column are used to defi ne the
duration of the output control signal:
0.1 s
,
0.5 s
,
1 s
,
2 s
and
4 s
. A permanent signal is available with the
Static
option.
• Output
Logic
(Only available in case the
Key Preset
option is selected
in the
Function
combo box)
The combo boxes in this column are used to defi ne the
switching state of the control signal output.
Options:
Active Low
or
Active High
.
Summary of Contents for SurroundControl 31960 Series
