RTW SurroundControl 31960 Series, Manual, Page: 233 / 430

EN-17 SurroundControl 31960 4 | Connection | 4.2 | Pin-Assignment
GP IO (General-purpose Input/Output) (25-pin Sub-D-F)
Pin: Function:
1 IN Function key 1
2 IN Function key 2
3 IN Function key 3
4 IN Function key 4
5 IN Function key 5
6 IN Function key 6
7 IN Function key 7
8 IN Control key MODE
9 IN Control key MENU
10 IN Control key MORE
11 IN Control key INSTR(UMENT)
12 IN Key SEL(ECT)
13 IN Control key Input
14 IN Control key DIM
15 IN Control key Output
16 IN Control key Mute
17 OUT Output 1
18 OUT Output 2
19 OUT Output 3
20 OUT Output 4
21 OUT Output 5
22 OUT Output 6
23 OUT Output 7
24 OUT Output 8
25 Common potential and Shield/case
NOTE - The pins each have to be switched to pin 25 for
activating the corresponding function. All GP IO inputs are active low.
All GP IO are set to active low by factory, but logic state and switching
function can be changed. Refer to paragraph
External control via GP
IO connector included in the PDF version of the operating manual for
more detailed information.
Digital 3 In/Out, Digital 4 In/Out (25-pin Sub-D-F)
Pin: Function:
1 Audio-Output digital 4 (+, hot)
14 Audio-Output digital 4 (–, cold)
2 Shield/case
15
Audio-Output digital 3 (+, hot)
3 Audio-Output digital 3 (–, cold)
16 Shield/case
4
Audio-Output digital 2 (+, hot)
17 Audio-Output digital 2 (–, cold)
5 Shield/case
18
Audio-Output digital 1 (+, hot)
6 Audio-Output digital 1 (–, cold)
19 Shield/case
7
Audio-Input digital 4 (+, hot)
20 Audio-Input digital 4 (–, cold)
8 Shield/case
21
Audio-Input digital 3 (+, hot)
9 Audio-Input digital 3 (–, cold)
22 Shield/case
10
Audio-Input digital 2 (+, hot)
23 Audio-Input digital 2 (–, cold)
11 Shield/case
24
Audio-Input digital 1 (+, hot)
12 Audio-Input digital 1 (–, cold)
25 Shield/case
NOTE - The AES3 inputs are permanently terminated
with 110

.
3G/HD/SD-SDI In Through (BNC-F; SD version only)
(External view of
the connector)
P i n 1 4
P i n 1 5
P i n 1 6
P i n 1 7
P i n 1 8
P i n 1 9
P i n 2 0
P i n 2 1
P i n 2 2
P i n 2 3
P i n 2 4
P i n 2 5
P i n 1
P i n 2
P i n 3
P i n 4
P i n 5
P i n 6
P i n 7
P i n 8
P i n 9
P i n 1 0
P i n 1 1
P i n 1 2
P i n 1 3
(External view of the
connector)
Ref Sync In (25-pin Sub-D-F)
Pin: Function:
1 Ref Sync In (AES3), (+, hot)
14 Ref Sync In (AES3), (–, cold)
2 Shield/case
15
don‘t wire, for future use
3 don‘t wire, for future use
16 Shield/case
4
don‘t wire, for future use
17 don‘t wire, for future use
5 Shield/case
18
don‘t wire, for future use
6 don‘t wire, for future use
19 Shield/case
7
don‘t wire, for future use
20 don‘t wire, for future use
8 Shield/case
21
don‘t wire, for future use
9 don‘t wire, for future use
22 Shield/case
10
don‘t wire, for future use
23 don‘t wire, for future use
11 Shield/case
24
don‘t wire, for future use
12 don‘t wire, for future use
25 Shield/case
NOTE - The AES3 Sync Input is permanently terminated
with 110

.
P i n 1 4
P i n 1 5
P i n 1 6
P i n 1 7
P i n 1 8
P i n 1 9
P i n 2 0
P i n 2 1
P i n 2 2
P i n 2 3
P i n 2 4
P i n 2 5
P i n 1
P i n 2
P i n 3
P i n 4
P i n 5
P i n 6
P i n 7
P i n 8
P i n 9
P i n 1 0
P i n 1 1
P i n 1 2
P i n 1 3
(External view of the
connector)
P i n 1 4
P i n 1 5
P i n 1 6
P i n 1 7
P i n 1 8
P i n 1 9
P i n 2 0
P i n 2 1
P i n 2 2
P i n 2 3
P i n 2 4
P i n 2 5
P i n 1
P i n 2
P i n 3
P i n 4
P i n 5
P i n 6
P i n 7
P i n 8
P i n 9
P i n 1 0
P i n 1 1
P i n 1 2
P i n 1 3
(External view of the con-
nector)
Pin: Function:
Pin: Signal
Ring: Shield/case
NOTE - Input signals are active looped
through without processing.
Block diagram of the 3G/HD/SD-SDI interface
Pin-Assignment (continued)
© 05/2013 | Technical changes without prior notice.