RTW SurroundControl 31960 Series, Manual, Page: 382 / 430

9 | Menu | 9.7 | Generator and Surround Ident Settings: The Generator and Surround Ident Settings Menu EN-166 SurroundControl 31900/31960 Series
Please proceed as follows to assign a wave fi le intro to the Surround Ident (BLITS) or the Stereo Ident sequence:
6. The network interface is opened in the web browser
and the Software update screen is displayed. Select the
BLITS ident intro upload or the Stereo ident intro
upload option.
7. The BLITS intro upload resp. Stereo intro upload
screen is displayed. Please read the instructions on this
page carefully.
8. Select the Browse button, search for your wave intro fi le
and select it.
9. When your selection is displayed in the text fi eld beside
the Browse button you can start the upload by pressing
the Upload BLITS ident intro resp. Upload Stereo
ident intro button.
10. Restart your unit after the upload is done.
1. Produce a 8 bit mono wave fi le with 500 KB maximum of
size, containing e. g. your broadcast station identifi cation
sound. Store this fi le on a computer with web browser and
network connection.
2. Press MENU . The unit changes to menu mode.
3. Select the Communication and Time menu tab. The Glo-
bal Communication and Time Settings menu is shown.
4. Read the IP address of your SurroundControl unit. You
can keep the menu page opened.
5. Open the web browser on your computer and enter the IP
address.
Please proceed as follows to activate the wave fi le intro for the use with the Surround Ident (BLITS) or Stereo Ident
sequence
1. Press MENU to enter menu mode.
2. Select the Generator and Surround Ident Settings
menu tab. The Generator and Surround Ident Settings
menu is shown.
3. Check the Enable option in the Surround Ident area or
check the Enable option in the Stereo Ident area.
4. Check the Wave fi le intro option in the Surround Ident
area or check the Wave fi le intro option in the Stereo
Ident
area. The loaded wave fi le is labelled right beside
this chechbox.
5. Open the Format combo box in the Surround Ident resp.
Stereo Ident
area.
6. Select the option you need (e. g. BLITS 5.1 for Surround
Ident).
7. If an offset is needed for the digital or analog outputs, use
the Digital offset or Analog offset list boxes in the Sur-
round Ident resp. Stereo Ident area and enter a value
between -12 and +12 dB.
8. Select the Save & Exit button to save the setup and to
leave the menu. The dialog box Save Global Settings? is
shown.
9. Select the Save & Exit button again to store the changes
and to return to normal operation. With each sequence
played out, your wave fi le is distributed as an intro.