RTW SurroundControl 31960 Series, Manual, Page: 270 / 430

8 | Instruments (Display Modes) | 8.1 | Controlling the instruments EN-54 SurroundControl 31900/31960 Series
• Function Select
When Function Select mode is active you can operate the
active instrument identifi ed by a highlighted frame around
the instrument window. The focus can be switched bet-
ween window 2 and window 3 by pressing the
INSTR key
or clicking in the window with the left mouse key. Window
1 (Toolbar) and window 4 (Status Box) can never be given
the focus (made active) because this mode is not relevant
for them.
The available functions for the active instrument are
shown as buttons in the Toolbar in window 1. If more than
7 functions are available they can be displayed by selec-
ting
MORE .
• Instrument Select
In this mode there are two Toolbar layers for selecting the
available instruments and two additional layers with 7 Fac-
tory Presets and 7 User Presets. To display an instrument
in window 3 and activate it just press the corresponding
function key or optional click its Toolbar button with the
mouse. When selecting a new instrument, the current set-
tings of the instrument you were using before are stored
automatically and restored when you return to this instru-
ment later.
8.1.2 | Toolbar Modes: Function Select and Instrument Select
The Toolbar has two different modes which can be selected with the MODE key:
• Function Select: Mode for operating the instruments
• Instrument Select: Mode for selecting an instrument or a preset
The default mode is Function Select.
Example
SSA in Function Select mode
> MODE
Instrument Select mode
> Instrument VSC
Vectorscope in Function Select mode
> Function Display
1 3 5
2 4 6