RTW SurroundControl 31960 Series, Manual, Page: 371 / 430

EN-155 9 | Menu | 9.4 | Input/Output Routing: The Global Routing Settings
EN
SurroundControl 31900/31960 Series
• Color Assignment
This key is used to select the color mode for the LRA
bargraph. In
Individual mode, an individual color can be
assigned to each of the three LRA bar sections (low ran-
ge, comfort zone, high range). In
Swap mode, the whole
LRA bar changes its color when the measured LRA value
exceeds the limits for the bargraph sections entered with
the
LRA low range and Comfort Zone parameters.
Options: Individual , Swap . Default: Individual
• Grid color
This button displays the color selector for changing the
LRA grid color.
• Label/scale/numeric font color
This button displays the color selector for changing the
label, scale and numeric font colors of the LRA bargraph.
• LRA low range color
This button displays the color selector for changing the
LRA low range color.
• Comfort Zone color
This button displays the color selector for changing the
LRA Comfort Zone color.
• LRA high range color
This button displays the color selector for changing the
LRA high range color.
• Numerical enabled
This check box is used to activate or deactivate the nume-
rical LRA display.
• Close
This button closes the page and returns you to the Loud-
ness Settings menu page from where you entered the
LRA Group
menu.
• LRA enabled
This checkbox is used to activate or deactivate the LRA
instrument display.
• Scale Range
This combo box is used to select the spread of the LRA
instrument scale.
Options:
6 LU , 10 LU , 20 LU , 30 LU . The default is 10 LU .
• Mode
This combo box is used to select one of four modes
available for the
LRA instrument. The LRA Bar mode
displays the LRA measurement on a bargraph meter with
the zero value at the bottom. The
MagicLRA mode uses a
scale with a fi xed centered zero position (corresponding to
the target level) where the LRA bar spreads symmetrically
from the
0 position and it‘s length is a measure for the
absolute LRA value. Ma I mode is a combination
of LRA and Integrated ( I ) loudness measurements. The
LRA bar has a moving, relative zero position that is ancho-
red to the
Integrated value measured. The Ma
I + Num mode adds a numerical display of the measured
LRA value inserted to the LRA bargraph.
Options:
LRA Bar , MagicLRA , Ma I , Ma
I + Num . Default: LRA Bar
• LRA Low Range
This parameter is used to select the spread of the LRA
bar‘s low (center) range.
Options: 1 to 20 LU in steps of 1 LU. The default is
2 LU .
• Comfort Zone
This key is used to select the spread of the LRA bar‘s
Comfort Zone. Please note that the Comfort Zone will only
be visible if this value exceeds the value entered for the
low range (see above).
Options: 1 to 20 LU in steps of 1 LU. The default is
4 LU .