RTW SurroundControl 31960 Series, Manual, Page: 227 / 430

EN-11 1 | Before you begin | 1.1 | Preface
EN
SurroundControl 31900/31960 Series
Thank you for purchasing a model of the SurroundControl se-
ries, the powerful 8-channel systems for analog and digital au-
dio signals. By combining extensive level metering and signal
analysis options with comprehensive monitor controller func-
tions and various signal and control interfaces, the units are
ideal tools for surround sound production. They are the perfect
choice for visualizing analog and digital surround, stereo and
multichannel formats in several professional audio applications
like broadcast, pre and post production environments, music
production, DVD mastering and cinema surround sound. Ad-
ditional features, like the integrated multi-channel test signal
generator and the option to connect a calibration microphone,
extend the SurroundControl’s scope to calibration and general
maintenance of your entire studio monitoring setup.
1 | Before you begin
1.1 | Preface
The multifunctional units feature, among others, Peak Program
Meter plus separate SPL/Leq-bargraph, EBU R128, ITU-R
BS.1770-3/1771, ATSC A/85, ARIB Loudness Meter, Sur-
round Sound Analyzer, Multi-Correlator, Vectorscope (Lissajous),
1/3 and 1/6 octave RTA, AES/EBU Status Monitor, Blits and
Dialnorm. Depending on the model, 3G/HD/SD SDI signals can
be de-embedded and Dolby® E and Dolby® AC-3 signals can
be decoded, the signal’s status and data can be displayed.
Furthermore, there are extensive monitoring functions like Mo-
no Mode, DIM Level, Solo Mode, Surround Mode Settings, Vo-
lume Sensibility, Listening Level, Channel Setting and various
options for calibration available.
The functions selected by the user are presented in up to three
separate display sections shown on an external VGA monitor
(31900 series), using the VGA output, or on the built-in VGA
color display (31960 series).
The right display section shows a PPM or loudness display.
The two left display sections can be programmed to show in-
dividual instrument functions at the same time. A fourth lower
display section always shows the Toolbar with the key func-
tions for operation. The units are operated by the use of the
Remote Control 30050 (31900 series) or the control panels
on the front side (31960 series).
The internal menu system contains in-depth confi guration op-
tions for all global settings, for all the display functions and for
the comprehensive signal routing. Individual setups for various
applications can be stored as user presets inside the unit and
these are accessible directly from normal operation with a sin-
gle button.