RTW SurroundControl 31960 Series, Manual, Page: 364 / 430

9 | Menu | 9.4 | Input/Output Routing: The Global Routing Settings EN-148 SurroundControl 31900/31960 Series
After having selected one of the loudness options in the Pro-
gram Meter combo box on the Key 1 to Key 7 menu pages
and selecting the PPM + Loudness Settings button, pres-
sing the Channel Group button on the PPM + Loudness
Settings menu page shows the Channel Group menu page.
This page is used to confi gure the way the bargraphs in the
channel section of the
Program Meter work. In normal display
mode, these bargraphs are shown in the left area of the Pro-
gram Meter in window 2.
The Channel Group consists of 2 bargraphs in 2 channel ste-
reo mode and 6 bargraphs in 5.1 mode. Each bargraph shows
a combination of
PPM and Loudness bargraphs (the loudness
section of this display mode conforming to the selected loud-
ness standard). Various options for the combined display of
loudness and PPM bargraphs are available (see below).
9.4.2.10 | Parameters available in the Channel Group (Loudness modes)
This chapter refers to the parameters shown in the Channel Group after one of the loudness modes was selected to be the
Program Meter mode.
NOTE - For the parameters shown after PPM mode was selected to be the Program Meter mode, please refer to Pa-
rameters available in the Channel Groups (PPM mode) chapter.
Channel Group in loudness modes