RTW SurroundControl 31960 Series, Manual, Page: 288 / 430

8 | Instruments (Display Modes) | 8.5 | The CORR Instrument EN-72 SurroundControl 31900/31960 Series
8.5 | The CORR Instrument
The CORR instrument is always displayed in window 3. To set the focus on this instrument (indicated by a highlighted frame
around the window), simply press the INSTR key. With the focus on window 3, the CORR functions are displayed in the Toolbar
(window 1).
• Surround modes
With 5.1, 6.1, 7.1 Cinema and 7.1 DD+ surround modes
selected, the
CORR instrument in Normal mode shows
a multi-fold correlator display and features phase meters
for all possible channel pairs (except LFE) graphically
placed in the speaker setup of the respective surround
mode. A low pass fi lter (300 Hz) can be activated and
is represented in the LS/RS phase meter. In
LFE mode,
it displays the phase relationships between every single
channel available in the surround format used and the
LFE channel.
In 6.1 surround mode the system does not yet have a se-
parate display for the surround center channel.
In 7.1 surround mode the levels of the additional front
channels are mixed with those of the front center channel.
There is only one common front center indicator.
L – R
LS – RS
C – R L – C
L – RS LS – R
L – LS RS – R
LS – C C – RS
Status display of the LP
fi lters for LS – RS
Normal display (example: 5.1 surround)
Channel pairs:
C – LFE
LS – LFE
RS – LFE L – LFE
LFE display (example: 5.1 surround)
Channel pairs:
R – LFE
• Multi-Channel modes
In Multi-Channel modes the CORR instrument only dis-
plays the phase meters (up to four) of 2-Channel Stereo
pairs marked in the
Peak Program Meter with a spot
correlator between the bargraphs.
• 2 Channel Stereo mode
The CORR instrument is not available. The phase meter is
integrated in the Audio Vectorscope (
VSC instrument).