ROJ PCS 200, Original Instructions Manual

Page: 28 / 112

Installation
- 2.8 - PCS 200 Kit
2.6 BATTERY
The battery should be mounted as near as possible to the alternator, within the limits
imposed by its space requirements and its weight.
We suggest using a 110Ah start battery.
Battery type: FIAMM Titanium L6 110
Dimensions (LxWxH): 394 x 175 x 190 mm
Weight: 22.5 Kg.
☞
The sizes and weights of different batteries brands and models can vary in a
considerable way. To ensure the requested flexibility when choosing the battery,
provide a housing capacity of approximately 10% higher than the one indicated
above.
☞
In case you are not going to use the system for a long time, we recommend you to
disconnect both battery poles in order to prevent the battery from being discharged.
2.7 SPEED SENSOR
2.7.1 Single cogwheel sensor
The speed sensor is implemented using a hall effect speed sensor type Cherry
GS102301 (P/N ROJ 50A00174) and relevant cable (P/N ROJ 05R01400).
This sensor detects the speed of a phonic wheel connected to the machine drive
wheel.
The sensor must be connected to the ECU cabling connector indicated by SPEED.
Figure 2-8
–
Speed sensor and its cable
The phonic wheel is not provided with the kit, because the maximum dimensions as
well as the number and shape of the teeth and the connection to the wheel depend
on the type of machine and on the available space.
The following figure represents an example of cogwheel used for the suggested
sensor.