ROJ PCS 200, Original Instructions Manual

Page: 10 / 112

Preface
- vi - PCS 200 Kit
Warranty and Responsibility of the Manufacturer
The PCS 200 system described in this manual has been designed to be incorporated
into agricultural machinery (typically Seeders) and is therefore intended to operate
exclusively in combination with the above mentioned machines.
The various system components can be installed on the seeder by:

the seeder manufacturer

ROJ specialized and authorized personnel
The testing and commissioning of the system has to be performed in any case by
specialized personnel.
ROJ declines any responsibility in case of improper installation of the system not
following the instructions given in this manual or if the system is commissioned
without an authorization given by
ROJ .
The end user must ensure that the equipment is used in accordance with the laws
and regulations in force in the country of installation, in particular as far as the
workers safety is concerned, and more generally in relation to the health, safety and
accident prevention requirements.
Any complaint must be promptly notified upon detection of any defect attributable to
the
PCS 200 system components.
In the event that after an accurate assessment the complaint is deemed admissible,
ROJ may, at its sole discretion, replace or repair the defective components.
Other warranty terms
ROJ guarantees the quality and reliability of the equipment that has been designed
and manufactured to provide optimal performance.
The warranty does not cover any damages or indirect costs due to machine
downtime, or irregular operation caused by improper use of the equipment or of
single
ROJ devices.
It is the responsibility of the end user to periodically perform cleaning and ordinary
preventive maintenance activities, aimed at keeping the equipment operation within
the expected performance range.
Any failure or improper equipment connection will void the warranty.
The warranty does not apply in case of floods, fire, electrostatic/inductive discharges
or in case of discharges caused by lightning or other phenomena external to the
ROJ
equipment.
The warranty does not cover any damages to operators or other equipment/devices
connected to the
ROJ equipment.
The customer is fully responsible for the proper use and maintenance of the
equipment, according to the instructions provided in this user manual.
This warranty does not cover parts subject to normal wear.
Any other form of warranty is excluded.