ROJ PCS 200, Original Instructions Manual

Page: 77 / 112

User Manual
- 3.36 - PCS 200 Kit
3.7.4 Seeding job
In order to proceed, you need to start a seeding job.
If the seeding job is inactive (seeding job indicator off  ), the motors do
not react to any movement of the machine.
Button Description
Click on this button to start a seeding job.
The job status indicators will turn green ;
Once the seeding job is active, the
“
Prefill
”
phase
”
is immediately
run, and the rows motors start turning until the disc is full of seeds.
After that the system waits for the tractor
’
s movement on the field
which determines the electric motors movement.
The partial ha-counters and the seeds counters are reset at the
beginning of the seeding activity.
Press the button to resume a seeding job which you had previously
paused.
In this case a
“
Prefill
”
is carried out only in case the PTO had been
switched off during the pause.
The partial ha-counter and the seeds counter restart from the value
indicated before the pause.
Press the Pause button to temporarily interrupt the seeding job
without resetting the statistical counters related to the already
started job.
The job status indicators will turn yellow ;
The seeding job is almost finished. The job status indicators will turn
red/grey .
After a seeding job is closed, a number of information about the
finished job is saved in the internal memory. A status window
indicates this activity. As soon as the status window closes, it will be
possible to start a new job.