ROJ PCS 200, Original Instructions Manual

Page: 11 / 112

General Information
PCS 200 Kit - 1.1 -
1 - GENERAL INFORMATION
1.1 INTRODUCTION
1.1.1 The ideal solution to control and optimize the seeding process
The PCS 200 kit has been designed for the installation on seeders in order to control
and optimize the entire seeding process.
Thanks to the exclusive flexibility and configurability the PCS 200 kit represents the
best solution for pneumatic and precision seeders.
1.1.2 Purposes of this manual
This manual aims to provide the PCS 200 Kit users with the essential information on:
•
How to install and properly connect the system components safely.
•
How to configure the system and to set up the various operating parameters
according to the user
’
s requirements.
•
How to carry out the preventive maintenance under safe conditions.
1.1.3 How to Use this Manual
The manual is divided into four sections:
Section 1
–
shows the structure and the components of the system and provides
notes and safety warnings, in addition to the technical data of the
units that are included in the kit.
Section 2
–
describes the operations and procedures required for a correct
installation and commissioning of the system.
Section 3
–
describes the machine operator’s interface, the configuration modes,
the parameters setting and the information for a correct interpretation
of alarm messages and faults.
Section 4
–
includes information and warnings useful to carry out a correct
maintenance of the system.