ROJ PCS 200, Original Instructions Manual

Page: 55 / 112

User Manual
- 3.14 - PCS 200 Kit
3.6 SEEDING SETTINGS
This window allows to set up the seeding parameters and the parameters for the
fertilizer spreader and the micro-granulators A and B.
Path:
 
Machine Tab
Field Values range Description
1
800
–
25000
Number of pulses per 100m.
Press the
8
button to run the speed sensor calibration
session. (See below)
2 …
. It enables the single rows, to be found in the setup pages.
(See below)
3
15 - 400 Distance of two close rows in the machine.
4
1 - 255 If the machine is foldable (in whichever way) it indicates the
number of foldable rows in the machine.
5 …
. If sensors are present on the foldable parts of the machine, it
is possible to enable the automatic shut-off of the allocated
motors and of the relative motors on the fertilizers and
microgranulators hoppers.
6 …
. It enables the sprayer mode and activates the relay which
controls the weeding pump. Available over 0,5 km/h.
7 …
. It is calculated from the parameters set and indicates the
maximum rotation speed of the motor. If this speed is
1
2
3
4
5
6
7
8
9