ROJ PCS 200, Original Instructions Manual

Page: 81 / 112

User Manual
- 3.40 - PCS 200 Kit
Error
code
Message Solution
2502 Group C parameters mismatch
Not possible to set that combination of parameters
(number of disk holes, seeding distance)
2503 Group D parameters mismatch
Not possible to set that combination of parameters
(number of disk holes, seeding distance)
2504 Spare parameters mismatch
Not possible to set that combination of parameters
(number of disk holes, seeding distance)
2510 Seeding speed too high Reduce tractor speed
2520 Seeding job not active
Start the seeding job by pressing the relative
button.
6000 Low voltage Check speed sensor cabling. Check battery voltage
6001 Power failure stop Check speed sensor cabling. Check battery voltage
xx = it indicates the motor which generated the error
1-32 Seeding disc 1-32
33-40 Fertilizer spreader 1-8
49-56 Micro-granulator A 1-8
57-64 Micro-granulator B 1-8
Error
code
Message Solution
1xx00 Overcurrent
Cycle power of the system from battery
disconnect.
1xx01 Motor high temperature
Let motor cool down. Check mechanical
arrangement to check that there aren't
unwanted frictions, damaged bearings, etc.
1xx02 High voltage
Check PTO speed to be according to
specifications. Check alternator voltage.
Check battery connection and fuses
1xx03 Low voltage
Check PTO speed to be according to
specifications. Check alternator voltage.
Check battery connection and fuses
1xx04 PCB high temperature
Let motor cool down. Check mechanical
arrangement to check that there aren't
unwanted frictions, damage bearings, etc.
1xx06 High I2T Not active on customer release
1xx07 Rotor lock
Check seeding disk for stuck seeds or
distributor of stuck/blocking product
1xx08 Motor too high temperature
Let motor cool down. Check mechanical
arrangement to check that there aren't
unwanted frictions, damage bearings, etc.
1xx09 PCB high temperature
Let motor cool down. Check mechanical
arrangement to check that there aren't
unwanted frictions, damage bearings, etc.
1xx10 Overspeed error
Cycle power of the system from battery
disconnect. Contact supplier if not solved
1xx11 Heart beat ECU missing
Check CAN cable connection between ECU
and DMD. Check supply cable to ECU. Check