ROJ PCS 200, Original Instructions Manual

Page: 7 / 112

Preface
PCS 200 Kit - iii -
FOREWORD
All machines (1) and equipments designed and manufactured by ROJ are supplied
with the relative user
’
s manuals in compliance with the Essential Safety Requirement
(ESR) 1.7.4 - Instructions
–
Annex I of the Machinery Directive 2006/42/EC.
Since the Machinery Directive requirements, first of all the ESR in Annex I are
legally binding obligations , ROJ put a special emphasis on all ESR 1.7.4 clauses
during the drafting phase of these manual, in particular:
1. The ROJ user and maintenance manuals are supplied in the language of the
machine destination country, within the European Union and, when necessary,
an
“
Original language
”
copy of the manual is also provided.
2. The ROJ manuals always include a
“
proforma
”
copy of the EC Declaration of
Conformity or a
“
proforma
”
copy of the Declaration of Incorporation of the
“
Partly
completed machinery
”
for the relevant machine. These are just set out by way of
indication, and they shall not be considered as replacing the original Declaration
of Conformity Incorporation subscribed by the supplier, and delivered separately
to the Customer.
3. The
ROJ
Use and Maintenance manuals contain the information deemed as
important and necessary by the Manufacturer in order to:
 Correctly understand the functioning principles of the machine.
 Carry out all the handling/mounting, installation/power sources cabling, in
Safe conditions , keeping into account the possible dangers related to the
above activities and giving directions, prescriptions and suggestions arising
from a careful risk assessment by the Manufacturer according to the
principles of the EN 12100:2010 Harmonized Standard and the ISO/TR
14121-2 Risk Assessment Guide.
 Properly use the machine (safety devices, emergency devices, operating
procedures etc.) in
Safe conditions , drawing the operator
’
s attention on
the possible
“
Residual risks
”
, i.e. the still remaining risks despite all the
safety measures taken after the risk assessment, as previously mentioned.
 Carry out the ordinary/preventive maintenance of the machine (1) in Safe
conditions , also drawing the maintenance operators attention on the
possible Residual risks.
4. The ROJ Use and Maintenance Manuals do not only describe the intended use
of the machine (1) , but they also give information about the improper uses which
can reasonably be foreseen, based on the Manufacturer
’
s experience.