ROJ PCS 200, Original Instructions Manual, Page: 56 / 112

User Manual
PCS 200 Kit - 3.15 -
exceeded during the job, the warning and alarm messages
associated to this value will be generated from the system.
8 …
. It allows to start the calibration of the speed sensor
9 …
. It allows to select the type of seed.
This selection will cause the automatic change of the
following parameters
•
Pressure range min and max
•
Doublets/missings sensitivity
•
Investiments sensitivity
Speed sensor calibration
Pressing the
8
button, it is possible to access the sensor calibration screen.
The following window will pop up:
In order to calibrate the sensor, you need to trace a target line exactly 100m far from
the actual tractor position, and to travel this 100m section at a moderate speed (5-9
km/h).
The number of wheel pulses will appear on the screen. In this operating condition it is
possible to go back to the seeding job in order to optimize time and efficiency.
Once the distance has been covered, it is possible to confirm the setting by clicking
the
1
button
.
Note: in order to improve the precision of the absolute value for the seeding
distance, it is important to calibrate the seed sensor each time you change the field
or if the soil conditions have changed, in order to compensate a different sinking of
the tractor wheel.
1