ROJ PCS 200, Original Instructions Manual

Page: 99 / 112

User Manual
- 3.58 - PCS 200 Kit
3.12 TEST
Path:
 
Sim Tab
This tab allows to simulate the tractor speed. Use this window to simulate a seeding
job session without having to effectively turn the ground wheel of the machine.
This test mode is accessible in all the seeding work conditions. The MDs will only
work if they have been activated (they should neither be excluded nor stopped by the
row exclusion function) and when the seeding job is active.
During this test all functions like the seeds count, the hectares count and so on will
be active just like the machine was working on a real field.
Field Description
1
If this option is selected, it enables the simulation of a "real" tractor speed
profile (data detected on the field). In this case the Speed and Target
acceleration fields will be used.
2
If this option is selected it enables the simulation. The speed increases until
the target speed value is reached (
Target Speed ), following the
acceleration ramp as specified in the Acceleration field.
If it
’
s unselected, the speed will start to decrease until the 0 value is
reached, following the deceleration ramp as specified in the Acceleration
field.
3
Current speed
5
1
2
3
4