ROJ PCS 200, Original Instructions Manual

Page: 38 / 112

Installation
- 2.18 - PCS 200 Kit
The following Figure shows the correspondence between the number of fittings and
the number printed on the red corresponding conductor.
Figure 17 - 05R01404 cable – 3 outputs
Figure 18 - 05R01372 cable – 6 outputs
Figure 19 - 05R01373 cable – 7 outputs
☞
The CAN connector (4-poles white Molex Mini-Fit jr) should be connected to the CAN
socket corresponding to the dial. (Yellow rectangle in Figure 15 and Figure 16) .
The unused sockets on the distribution cables should be secured with element no.
05R01381.
2.9.4 ECU connection
It is possible to connect the geared motors to the system using the cables indicated
by the codes of the following table.
Connect one cabling side (18-poles black CINCH connector) to the MD, and the 8-
poles grey Deutsch connector has to be connected to the distribution cable
(05R01404
cable
–
3 outputs
,
05R01372 cable
–
6 outputs or 05R01373 cable
–
7
outputs).