ROJ PCS 200, Original Instructions Manual

Page: 100 / 112

User Manual
PCS 200 Kit - 3.59 -
4
It indicates the simulation of the top speed to be reached. The value is
expressed in km/h.
The corresponding Km/h value should be calculated as follows:
Speed [km/h] = 3.6*Speed[mm/s]/1000
5
It indicates the tractor speed to be simulated.
The field value is expressed in km/h/s
Torque Tab
In this tab it is possible to Read the MD torque and speed (sampling every 200ms),
for the distributors and the seeding discs.
This test mode is accessible in all work conditions.
Field Description
1
Selection of the MD to be monitored
2
Select this case to activate the torque monitoring function. The torque
value is sampled each 200 ms.
The window is refreshed every 1sec with new samples.
3
Update button: if pressed the samples values are refreshed.
Insert a USB stick into the console slot, clear the
“
Enable
”
check box and
press
“
Refresh
”
to store all the data on the USB drive. The file name will
be TORQ_ <data > _ < time> .txt
4
Number of valid samples for the window in the chart.
5
Torque and speed chart window. The torque value is expressed in cNm
and the speed in Hz.
6
A check mark on % allows to see the Torque and Speed values expressed
in percentage with reference to the maximum torque and speed.
1
2
3
4
5
6