ROJ PCS 200, Original Instructions Manual

Page: 78 / 112

User Manual
PCS 200 Kit - 3.37 -
3.8 ALARMS
The alarms and warnings are reported in a pop-up window like the one shown in the
picture.
The
➌
button confirms the alarm acknowledgment and closes the window, but it
does not cancel the alarm.
There are various kinds of alarms. According to the kind of alarm, it is possible to
cancel it (the alarm status is eliminated) automatically or through a system rebooting,
pressing the battery disconnect switch.
Category Background
colour Buzzer The pop-up
window closes Description
Unrecoverable
emergency Red 5 continuously
repeated bips Manual,
pressing
the
alarm
acknowledgment
button
It is not possible to go on
seeding.
The system must be
disconnected from the
power supply
Recoverable
emergency It is not possible to go on
seeding.
The system must be
disconnected from the
power supply
Standard error 1 bip It is possible to go on
seeding but the device
showing an error is not
working properly
Warning Yellow 1 bip Automatic after
3 seconds It is possible to go on
seeding but the operator
should be aware of the
situation.
The already checked (acknowledgment button pressed) but still active errors, will be
visualized in the window in a lighter background colour.