ROJ PCS 200, Original Instructions Manual

Page: 83 / 112

User Manual
- 3.42 - PCS 200 Kit
xx = it indicates the motor which generated the error
1-32 Seeding disc 1-32
33-40 Fertilizer spreader 1-8
49-56 Micro-granulator A 1-8
57-64 Micro-granulator B 1-8
Error
code
Message Solution
1-1xx16 Blocked Seeding disk
Check seeding disk for stuck seeds or
distributor of stuck/blocking product
1-1xx17 Low voltage
Check PTO speed to be according to
specifications.
Check alternator voltage
Check battery connection and fuses
1-1xx26 Seed selector
Verify that there isn't any material (seeds,
dust, etc.) preventing the correct movement
of seed selector.
Verify that seed selector cam is fitted
properly on seed selector motor shaft.
From the menu\Diagnostic\Test\Seed
Selector, press "Homing" button to perform
the homing procedure
1-1xx80 High number of doublets
Adjust the seed selector position to a lower
set value.
1-1xx81 High number of missings
Adjust the seed selector position to a higher
set value.
1-1xx82 Deviation from theoretical investment
Check seeding disc and seeds selector
position.
1-1xx83 High number of missings
1
Verify selector position, pressure rate or the
presence of the seeds in the hopper.
1-1xx84 Prefill not completed
Verify that vacuum is correct
and seeds are present in the hopper.
1 This is the same message as for 1-1xx81 alarm, but in this case there is a consecutive missing doublets situation (for ex. empty
hopper).