SMIQ
Arbitrary Waveform Generator ARB
1125.5555.03
2.353
E-9
(SET SMIQ ACCORDING
TO WAVEFORM...)
....IQ FILTER
(VECTOR MOD)
The parameter IQ FILTER (filter of LACP Option
SMIQB47) is set in the VECTOR MOD menu. If a
waveform in WinIQSIM was compensated with the
frequency responses of this filter, it should be
switched on. A warning is output, if the waveform is
compensated, however, this compensation does not
apply for an SMIQ of this serial number or if the option
is not fitted to the SMIQ.
ON
Parameter is set
IEC/IEEE bus command
:ARB:ASET:DM:IQF ON
OFF
Parameter is not set
IEC/IEEE bus command
:ARB:ASET:DM:IQF OFF
...IQ SWAP
(VECTOR MOD)
The IQ SWAP parameter in the VECTOR MOD
menu is set. If a waveform has been generated in
WinIQSIM for this mode, it should be switched on. A
warning is output, if the parameter is not set as
indicated in the waveform.
ON
Parameter is set
IEC/IEEE bus command
:ARB:ASET:DM:IQSW ON
OFF
Parameter is not set
IEC/IEEE bus command
:ARB:ASET:DM:IQSW OFF
...PRBS (BERT)
The type of PRBS in the BERT menu is set. If a
waveform has been generated in WinIQSIM with this
PRBS, the latter should be selected with BER
measurement. A warning is output, if the parameter
is not set as indicated in the waveform.
ON
Parameter is set
IEC/IEEE bus command
:ARB:ASET:BERT:TYPE ON
OFF
Parameter is not set
IEC/IEEE bus command
:ARB:ASET:BERT:TYPE OFF
...TRIGGER OUT MODE
The parameters TRIGGER OUT1 MODE and
TRIGGER OUT2 MODE in the ARB MOD
TRIGGER... menu are set. Thus, the user can select
the function of the SMIQ trigger outputs in WinIQSIM
(see TRIGGER menu).
ON
Parameter is set
IEC/IEEE bus command
:ARB:ASET:TRIG:MODE ON
OFF
Parameter is not set
IEC/IEEE bus command
:ARB:ASET:TRIG:MODE OFF