SMIQ
Sample Setting for First Users
1125.5555.03
E-8
2.27
2.2.10
Correction of Input
Digital entries can be corrected by one of the following keys before terminating the input:
Key [-/
ç
ç
ç
ç
]
The backspace key deletes the value entered digit by digit. When the last
digit is deleted, the previous value is displayed.
Key [RETURN]
Pressing the [RETURN] key deletes the entire entry and results in the
previous value being indicated again.
For a subsequent new input in the setting menu, the first digit of the new
value is to be entered.
For a subsequent new input via the [FREQ] or [LEVEL] keys, the respective
key has to be pressed again.
Key [FREQ]/ [LEVEL]
In the case of a frequency or level input by means of the [FREQ] or [LEVEL]
keys, pressing the [FREQ] and/or [LEVEL] key again deletes the entire input.
2.2.11
Sample Setting for First Users
First users most quickly become familiar with the operation of the instrument if they execute the pattern
setting of this section.
First frequency and level of the RF output signal are set via keys [FREQ] and [LEVEL] in the DATA
INPUT field:
- Frequency
250 MHz
- Level
10 dBm
Operating steps
Explanations
PRESET
Reset the instrument to the defined
state.
5
0
2
FREQ
M
µ
DATA INPUT
Set the frequency to 250 MHz. The
menu cursor marks the permanent
frequency indication.
0
1
LEVEL
DATA INPUT
x1
ENTER
Set the level to 10 dBm. The menu
cursor marks the permanent level
indication.
RETURN
Reset the menu cursor to the menu
field.
