Digital Standard 3GPP W-CDMA (FDD)
SMIQ
1125.5555.03
E-9
2.188
ADJUST
TOTAL POWER
Changes the power of every activated code channel
so that the TOTAL POWER returns to 0 dB again,
while the ratio of the powers of the individual code
channels remains the same.
IEC/IEEE-bus command
:SOUR:W3GP:POW:ADJ
SELECT BS/MS
Fig. 2-109
DIGITAL STD – WCDMA/3GPP – SELECT BS(MS) menu
SELECT BS/MS has a special significance in the 3GPP W-CDMA menu: It is always displayed in the
bottom line of the scrollable area, i.e. above the four station blocks. After selection of this menu item
(
SELECT
hardkey), the cursor is positioned in the area below. The station whose parameters are to be
edited can be selected by means of the spinwheel or the arrow keys.
Note
:
The state of the BS/MS can also be toggled without selecting the station. Just move the cursor
to the station and press the ENTER key.
For editing the station parameters see section 2.14.2.5.
