manualshive.com logo in svg

Riso RZ2xx Series, Technical Manual, Page: 82 / 374

Share
Download
Riso RZ2xx Series Technical Manual Download Page 82

RISO Inc. Technical Communications

   us.riso.com

CHAPTER 5:  SECOND PAPER FEED SECTION

[ 5 - 4 ]

Vertical print positioning assembly

Planetary gear

Cam shaft

Outer vertical positioning gear

Print positioning pulse motor

Vertical centering sensor

Sector gear cam

Timing cam

2. Vertical Print Position Control

Pressing the       or       button of the print position key on the operation panel activates the print positioning
pulse motor.  The rotation of the pulse motor swings the vertical print positioning assembly either to the
clockwise or counterclockwise direction with the pivot on the cam shaft.   The movement of the vertical print
positioning assembly rotates the planetary gear.  The planetary gear then rotates the outer vertical positioning
gear.   The rotation of the outer vertical positioning gear offsets the position of both the timing cam and sector
cam against the print drum, causing the vertical print position on the paper to change.

The vertical default (home) position is checked by the vertical centering sensor.

0503

Summary of Contents for RZ2xx Series























































































































































































































































































































































































Reviews:

No comments