manualshive.com logo in svg

Riso RZ2xx Series, Technical Manual, Page: 163 / 374

Share
Download
Riso RZ2xx Series Technical Manual Download Page 163

RISO Inc. Technical Communications

   us.riso.com

CHAPTER 9:  CLAMP UNIT

[ 9 - 3 ]

2. Clamp Plate Opening Mechanism

When the START key is pressed for the master-making or confidential-master making, the print drum starts
to rotate from its position-B.   After the presence of the master on the print drum is checked and as the print
drum returns to position-B, the print drum stops once and starts the clamp plate opening action.   The clamp
motor activates and rotates the clamp cam until the light path of the clamp sensor-B is blocked by the disc.
This action brings the clamp opening cam down.

The print drum then rotates to start the master removal action.  The clamp opening cam, at its lowered
position, opens the clamp plate first, and then lifts the master ejection plate to eject the leading edge of the
master out from under the clamp plate.

0903

0904

0905

Clamp cam

Clamp sensor-B

Clamp opening cam

Clamp plate

Master ejection plate

Master

Summary of Contents for RZ2xx Series























































































































































































































































































































































































Reviews:

No comments