Riso RZ2xx Series, Technical Manual, Page: 320 / 374

RISO Inc. Technical Communications
us.riso.com
CHAPTER 17: TEST MODE
[ 17 - 8 ]
No. Data setting Details
Description Adjusts the original horizontal scan position on the flatbed (For FB scanning).
Setting
Range : ±1.5mm from the programmed default position
(+ is to left )
0 to ±15 (example: 15 = 1.5mm)
Unit : 5 (0.5mm)
Default : 0 (0mm)
Description Adjusts the original horizontal scan position on the flatbed (For FB scanning).
Setting
Range : 0mm to ± 3.0mm from the programmed default position
(+ is to left )
0 to ±30 (example: 25 = 2.5mm)
Unit : 5 (0.5mm)
Default : 0 (0mm)
Description Adjusts the original scanning start position on the flatbed
Setting
Range : ±6.0mm from the programmed default position
(+ moves scan start position down)
0 to ±60 (example: 28 = 2.8mm)
Unit : 1 (0.1mm)
Default: 0 (0mm)
Description Adjusts the original scanning speed on the flatbed (Adjust the speed for Lead PM)
Setting
Range : ±5.0% from the programmed default position
( - causes shrinkage)
0 to ±50 (example: 50 = 5.0%)
Unit : 1 (0.1%)
Default : 0 (0%)
Description Creates the image which adds the center black dot to image data.
Setting
Range
0: No center black dot <Default>
1: Center black dot present
0386
0380
0381
0382
0380
FB Horizontal Scan Position Adjust [For RZ3 series]
FB Scan Start Position Adjust
FB Horizontal Scan Position Adjust [For RZ2 series]
Activates or deactivates center black dot setting
FB Scanning Speed Adjustment