Riso RZ2xx Series, Technical Manual

Page: 307 / 374

RISO Inc. Technical Communications
us.riso.com
CHAPTER 16: PANEL MESSAGE
[ 16 - 29 ]
Warnings (Miscellaneous)
Error Type F01 [No master on print cylinder (drum)]
Description
F01-xxx
No Master on Print Cylinder
（Ｄｒｕｍ）
Make a New Master
To reset
display
Make a new master with an original.
Error Point Error Conditions
015 There is no master on the print drum at the start of printing.
Error Type F02 [Master image larger than paper size: 1]
Description
F02-xxx
Page Format is Larger than Paper Size
!! Possible Ink Smudges on Prints !!
To reset
display
Press "OK" or "Cancel" button. Also check the paper size.
Error Point Error Conditions
018
Paper size does not match with the image size on the print drum at the start of printing.
The paper size is smaller than the image size on the master.
Error Type F03 [Multi-up printing - Incorrect paper size]
Description
F03-xxx
!! Multi-Up is Not Available with This Paper Size !!
Replace with Proper Paper of Standard Size
To reset
display
Press reset key and place correct size papers on the paper feed tray.
Error Point Error Conditions
016 Tried to make multi-up printing with incorrect paper size.
Error Type F05 [Print quantiy under "Minimum Print Quantity"]
Description
F05-xxx
Enter Print Quantity Over The Programmed Minimum Value
To reset
display
Enter print quantity value over the programmed minimum value.
Error Point Error Conditions
019 In master making, the print quantity selected is less than the minimum print quantity.