manualshive.com logo in svg

Riso RZ2xx Series, Technical Manual, Page: 102 / 374

Share
Download
Riso RZ2xx Series Technical Manual Download Page 102

RISO Inc. Technical Communications

   us.riso.com

CHAPTER 6:  PRESS SECTION

[ 6 - 4 ]

2. Pressure Control Mechanism (RZ3 series)

Pressing the      or       button of the print density key on the operation panel activates the pressure control
pulse motor and moves the pressure spring tension plate. The movement of the pressure spring tension
plate changes the tension of the pressure spring.  This changes the amount of the pull applied on the pressure
lever;spring, and changes the print density by changing how hard the pressure roller hits against the print
drum.  The print pressure control pulse motor activates only when the machine is in motion. The printing
pressure varies depending on the printing speed, print density settings, ink color, how long the print drum was
not used and internal temperature of print drum.  The print pressure HP sensor detects the home position of
the printing pressure, which is printing pressure No.3.

Pressure control pulse motor

Pressure lever ;spring

Pressure HP sensor

Pressure spring tension plate

Pressure spring

0603

Summary of Contents for RZ2xx Series























































































































































































































































































































































































Reviews:

No comments