Riso RZ2xx Series, Technical Manual, Page: 332 / 374

RISO Inc. Technical Communications
us.riso.com
CHAPTER 17: TEST MODE
[ 17 - 20 ]
No. Unit check Details
No. Data clear Details
No. Data setting Details
Description Selects the REv events to be downloaded.
Setting
Range : 0 : All events & All errors
1 : All the errors only
2 : All errors, and Master-making and printing start points
3 : Manual events only
Default : 2 : All errors, and Master-making and printing start points
Description Sets the print drum information on the EEPROM of the Drum PCB.
Setting
Range : 0 to 255
[RZ2 series]
18: B4 19: A4/Letter 22: Legal/Foolscap
[RZ3 series]
33: A3 35: A4/Letter 37: Ledger
Default : 0
Description Inputs the first 4 -digits of the print drum serial number
Setting
Range : 0 to 9999
Unit : 1
Default : 0
Description Inputs the last 4 -digits of the print drum serial number
Setting
Range : 0 to 9999
Unit : 1
Default : 0
6. Protected Area Test Modes
Sets a VR value at paper guide fence width of 105 mm (A6 paper width).
Paper size VR adjustment
Test Mode No. 9874 must be activated to access into the Protected Area Test Modes.
CAUTION: Many hidden test modes used by the Factory are included in the Protected Area.
Activate only those test modes listed below.
Sets a VR value at paper guide fence width of 297 mm (A3 paper width).
1102
1103
Paper size VR adjustment
1193
REv Data Initialize
Initializes the REv data memory area
1200
REv Event Selection
1212
Drum Serial Code Entry 2
1210
Drum Code Entry
1211
Drum Serial Code Entry 1