Ricoh V-C3 D081, Field Service Manual

Page: 625 / 1092

No. Component Function
S83 ITB Position Sensor Monitors the speed of the ITB.
LEDs
No. Component Function
LED1 Double-Feed Detection LED
Emits light which is reflected from the paper to the double–feed
detection sensor to test the translucence of each sheet for
double-feed detection.
LED2
Accordion Jam Sensor
(LED) Flashes to show the user which lever to release to remove a
paper jam from the fusing rollers.
LED3 Fusing Exit Sensor (LED)
Flashes to show the user which lever to release to remove a
paper jam from the fusing unit.
SOLENOIDS
No. Component Function
SOL1 Pick–up Solenoid: Tray 2
Switches on when the tray 2 (middle tray) lift motor switches
on. This solenoid lowers the pick–up roller of tray 3.
SOL2
Separation Roller Solenoid:
Tray 2
When tray 2 (middle tray) is selected as the paper source, this
solenoid energizes and brings the separation roller in contact
with the feed roller until the leading edge of the sheet feeds to
the paper feed sensor.
SOL3 Pick–up Solenoid: Tray 3
Switches on when the tray 3 (bottom tray) lift motor switches
on. This solenoid lowers the pick–up roller of tray 3.
SOL4
Separation Roller Solenoid:
Tray 3
When tray 3 (bottom tray) is selected as the paper source, this
solenoid energizes and brings the separation roller in contact
with the feed roller until the leading edge of the sheet feeds to
the paper feed sensor.
SOL5 Pick–up Solenoid – Tray 1
Switches on when the tray 1 (tandem tray) lift motor switches
on. This solenoid lowers the pick–up roller of tray 1.
SOL6
Separation Roller Solenoid
– Tray 1
When tray 1 (tandem tray) is selected as the paper source, this
solenoid energizes and brings the separation roller in contact
with the feed roller until the leading edge of the sheet feeds to
the paper feed sensor.
Specifications
47
1