Ricoh V-C3 D081, Field Service Manual

Page: 538 / 1092

Result Comment
4 Factory default (Nothing has been done)
7
Developer Filling (SP3814) has been performed more than once for the color, whose
developer has already completely filled the development unit.
9
Failed. No developer inside the development unit, or the amount of developer inside
the development unit is insufficient.
Check 1-2. SP3817-001 to 004 (Developer Filling Admission) are all "0"?
"0000" should be displayed for all colors, K, M, C, Y
"0" = Developer filling has completed successfully.
"1" = Developer Filling has not completed successfully yet.
Check 1-3. SP3812-001 (Developer Setup Execute): displays 1111?
"1111" should display for all colors, K, M, C, Y, reading left to right.
Result Comment
1 Succeeded.
2 Interrupted abnormally
3 Vt lower limit error
4 Default (nothing done yet)
8 Toner supply error
9 Vtcnt error
2. Next, do the following procedures according to the results of SP value checking.
Case 1 If one of Check 1-1, Check 1-2, or Check 1-3 failed do Procedure 1.
Case 2
If all of Check 1-1, Check 1-2 and Check 1-3 all succeeded, the toner supply mechanism
may be broken. First do Procedure 2, and then do Procedure 1.
Case 3
If only Check 1-2 did not succeed (returned "1"), do Procedure 3 as a temporary solution.
However, for a permanent solution be sure to do Procedure 1 after performing Procedure
3. Otherwise, the image density will be abnormal.
Procedure 1
6. Troubleshooting
536
6