Ricoh V-C3 D081, Field Service Manual, Page: 1044 / 1092

8067
O:FIN Jobs [0 to 9999999/ 1]
These SPs total finishing methods for jobs executed by an external application, over the
network. The finishing method is specified by the application.
806x 1 Sort
Number of jobs started in Sort mode. When a stored copy job
is set for Sort and then stored on the document server, the L:
counter increments. (See SP8066 1)
806x 2 Stack Number of jobs started out of Sort mode.
806x 3 Staple Number of jobs started in Staple mode.
806x 4 Booklet
Number of jobs started in Booklet mode. If the machine is in
staple mode, the Staple counter also increments.
806x 5 Z-Fold
Number of jobs started in any mode other than the Booklet
mode and set for Z-folding. (Multi Fold Unit D394)
806x 6 Punch
Number of jobs started in Punch mode. When Punch is set for
a print job, the P: counter increments. (See SP8064 6.)
806x 7 Other Reserved. Not used.
806x 8 Inside Fold Half-Fold (FM2) (Multi Fold Unit D394)
806x 9 Three-IN-Fold Letter Fold-in (FM4) (Multi Fold Unit D394)
806x 10 Three-OUT-Fold Letter Fold-out (FM3) (Multi Fold Unit D394)
806x 11 Four Fold Double Parallel Fold (FM5) (Multi Fold Unit D394)
806x 12 KANNON-Fold Gate Fold (FM6) (Multi Fold Unit D394)
806x 13 Perfect-Bind Perfect Binder D391 Not Used
806x 14 Ring-Bind Ring Binder D392
8071
T:Jobs/PGS [0 to 9999999/ 1]
These SPs count the number of jobs broken down by the number of pages in the job,
regardless of which application was used.
8072
C:Jobs/PGS [0 to 9999999/ 1]
These SPs count and calculate the number of copy jobs by size based on the number of
pages in the job.
4. Appendix: Service Program Mode Tables
466
4