Ricoh V-C3 D081, Field Service Manual

Page: 307 / 1092

• The original SD card is proof that the customer has purchased that application and must remain with
the machine.
• If the front door is replaced, the stored SD cards must be removed and stored inside the new door.
1. Open the front door.
2. Remove the cover [A] on the door ( x2).
3. Remove the block [B].
4. Store extra SD cards [C] inside the cover.
5. Reattach the cover to the door.
Before Removing and Re-installing the VM Card
This machine is shipped with the VM card installed in Slot 1 (lower slot). The VM card holds the App2 Me
application, and other VM applications may also be included. If App 2 Me (or any other application) has
been enabled, it must be halted if you need to remove the VM card for any reason.
This needs to be done before:
• Updating the App 2 Me application firmware .
• Updating the main machine firmware
• Backing up the NVRAM
• Executing application move or undo with SP5873.
Before Removing the VM Card from the Machine
1. Push the "User/Tools" key.
Common Procedures
305
4