Ricoh V-C3 D081, Field Service Manual

Page: 141 / 1092

21. Attach the ground wire [A] to the main machine and LCIT ( x2).
• On the LCIT, attach the ground wire (1) and clamp it at (2) ( x1, x1).
• Attach the other end of the ground wire to the main machine at (3) ( x1).
22. Push the LCIT [B] against the side of the main machine.
23. Connect the LCIT I/F cable [C] to the main machine (
x1).
24. Fasten the screw to the lock plate [D] ( x1).
25. Reattach the left corner plates ( x2 each), push the paper tray into the LCIT, and close the paper
exit cover.
26. If you are going to install the heaters, do this now. See the next section.
-or-
If you will not install the heaters, skip the next section.
LCIT RT4000 (D350)
139
2