Ricoh V-C3 D081, Field Service Manual

Page: 805 / 1092

Trailing Edge Switch Timing for Special Paper 1: K.
Sets the switch timing that determines the distance from the leading edge where the settings of
SP2773 are applied during image transfer from ITB to paper. Applied only when in black-and-
white mode on Special Paper 1.
[-100 to 0/ 1 mm]
277
6
LEdge Cor:Sp1 FC
Leading Edge Correction for Special Paper 1: FC.
These SPs do the following settings when printing on Special Paper 1 in the full-color mode:
1) ITB: Sets strength/timing of the correction coefficient for the application of bias when the image
is transferred from the drum to the ITB.
2) PTR: Sets the strength/timing of the correction coefficient for the application of bias when the
image is transferred from ITB.
3) SepDC, SepAC: Set the strength/timing of the dc and ac charges applied to neutralize the
charges on the belt and paper so they will separate more easily.
Note: SP2776 selects the strength of the bias coefficient, and SP2777 sets the start timing of the
bias application.
7 Side1:PTR
[0 to 250/ 1%]
8 Side1:SepDC
9 Side1:SepAC
12 Side2:PTR
13 Side2:SepDC
14 Side2:SepAC
277
7
LEdge SWT:Sp1 FC
Leading Edge Switch Timing for Special Paper 1: FC. Sets the switch off timing of SP2776. The
selected value is the number of mm from the leading edge. Applies only to printing in full-color
mode on Special Paper 1.
Group 2000
227
4