Ricoh V-C3 D081, Field Service Manual

Page: 717 / 1092

SC785 B
Z-Fold Timing Sensor Adjustment Error 2 Japan Only
The output voltage light emitted from the sensor changed, but the return input was not
sufficient to attain V0.
• Sensor, mirror dirty from paper dust, other particles
• Harness loose, broken, defective
• Mirror out of position
SC786 B
Z-Fold Memory Error Japan Only
Several attempts to write to the Z-fold memory failed.
• Turn the machine power off/on
• EEPROM on Z-Folder main board defective
SC789 B
Proof Tray Exit Motor Error Multi Folder (D454)
The motor drive PCB detected an error at the motor due to overload, overheating.
Paper cannot exit at proof tray.
• Motor, motor drive board defective
Important: The S792-** SC Codes apply to the Ring Binder D392.
SC792-1 B
Junction gate error
Detected at HP after the time prescribed to leave the HP had elapsed (more than
36 pulses) (1 detection, jam, twice detected, SC error)
-or-
Not detected at HP after the time prescribed to arrive at the HP had elapsed (more
than 22 pulses) (1 detection, jam, twice detected, SC error)
• Path JG motor (M201) defective
• Motor connector loose, broken, defective
• Motor overload
• Path JG sensor (S203) connector loose, broken, defective
• Sensor (S203) defective
Service Call Tables
139
3