Ricoh V-C3 D081, Field Service Manual, Page: 859 / 1092

Switches shading reduction function in scanner data off/on.
[0 to 1 / 1/ 1]
4460 Digital AE DFU
These SP codes set parameters for the AE function.
1 Low Limit Value
This setting determines the lower limit for level of background
to be skipped for the AE function. The higher the setting, the
more background will be ignored.
[0 to 1023/ 392/ 1]
2 Background Level
This setting determines the level of background to be output
for the AE function.
[0 to 1023/888/1]
4490 FL Correction ON/OFF
This SP switches FL correction on/off.
0 (OFF): The linear settings of the gamma correction table are used to correct differences in FL.
1 (ON): Generates a gamma correction table and writes the settings to Ri20 using the values
of SP4492 set at the factory.
1 RED
2 GREEN
3 BLUE
4501 ACC Target Den(sity)
This SP sets the target density for the ACC adjustment for machines connected with the Copier
Connection Kit. For more, see "Troubleshooting – Special Procedures – Color Adjustment
for Connected Copiers" in the Venus-C1 (B132/B181/B200) Service Manual.
Group 4000
281
4