Ricoh V-C3 D081, Field Service Manual

Page: 800 / 1092

Leading Edge Switch Timing for Plain Paper: FC. This SP sets switch timing that sets the distance
from the leading edge where the settings of SP2426 are to apply. The value selected is the
number of mm from the leading edge of the paper. These settings 1) apply only full-color printing
on plain paper at full speed, and 2) apply to both sides of a duplex page.
2 PTR [0 to 30/1 mm]
3 SepDC [0 to 30/1 mm]
4 SepAC [0 to 30/1 mm]
242
8
TEdgeCor:Norm FC
Trailing Edge Correction for Plain Paper: FC. This SP sets the coefficient used to correct bias at
image to paper transfer for each side of the paper. These settings are applied to the trailing edge
for full-color printing on plain paper at full speed as far as where SP2429 takes effect.
7 Side1:PTR
[0 to 250/1%]
12 Side2:PTR
242
9
TEdgeSWT:Norm FC – PTR
Switch Timing for Plain Paper: FC. This setting sets the start timing for application of SP2428 007,
2428 012 at the trailing edge of each sheet (Side 1, Side 2). These settings are applied to the
trailing edge for black printing on plain paper at full speed and apply to black, even when printing
in full color mode.
[-100 to 0/1 mm]
The mm distance is measured away from the trailing edge of the image.
2430 Norm:K:LLL Plain Paper: K Very Low
2431 Norm:K:LL Plain Paper: K Low
2432 Norm:K:ML Plain Paper: K Medium Low
2433 Norm:K:MM Plain Paper: K Medium
2434 Norm:K:MH Plain Paper: K Medium High
2435 Norm:K:HH Plain Paper: K High
4. Appendix: Service Program Mode Tables
222
4