Ricoh V-C3 D081, Field Service Manual, Page: 848 / 1092

This SP displays the results of the TD sensor initialization with SP3801 001 to 006. The
machine returns the status of the previous initialization with numbers, 1 digit for each PCU.
The numbers are read in order as "K, M, C, Y".
Four numbers are used to indicate the status of the execution.
1: OK (success)
2: Cancelled (door opened, etc.)
4: Not executed (not selected for execution; this is not an error)
9: Vtcnt abnormal. Vtcnt (TD sensor control voltage) could not be adjusted to within 2.5
±0.2V. The machine issued a TD sensor error for the PCU where there is a problem (SC372
to SC375).
Note!: The "1111" display is read from left to right: KMCY.
3810 ClngInitSetExe
These SPs should be executed after replacement of the drum cleaning roller or drum cleaning
blade. This SP:
1. Checks and confirms that each PCU is installed and filled with developer.
2. Switches on toner supply and sends toner to the sub hopper of each PCU.
3. Sends toner to the PCU to coat the drum with toner. This prevents the cleaning blades
from bending and scouring the drums.
Note: This SP should be done after replacing the drum cleaning roller or drum cleaning
blade.
1 All Colors Y, M, C, K
2 Col Excludes Black (Y, M, C only
3 K
4 M
5 C
6 Y
7 A3 Page Cover
Sets the number of sheets for A3 coverage to prevent scouring of
the OPC drum.
[0 to 100/ 3/ 1 sheet]
4. Appendix: Service Program Mode Tables
270
4